Sika Floor Marine S-110

SikaFloor Marine S-110

Lightweight levelling compound (single component / self levelling)

Product description:

SikaFloor Marine S-110 is used as a self levelling compound for deck, before applying finish materials such as carpets, vinyl, tiles etc. in all types of dry accommodation areas. Underlay for ceramic tiles min. thickness 6 mm.

Approvals/Certificats:

Wheel-mark
Lloyd’s Register of Shipping
Bureau Veritas
United States Coast Guard

Surface preparation:

SikaFloor Marine S-110 may be applied on hard foundations such as concrete, steel, which must be free of dust, grease, oil, dirt, etc.

Sika Cleaner 205 can be used.

For use on zinc or aluminium including anticorrosion primers containing free zinc oraluminium. Please contact Sika Cufadan.

Primer:

SikaFloor Marine Primer C shall be used on steel, concrete and between layers.

Mixing:

One set SikaFloor Marine S-110 consists of:
Powder 1 bag of 20 kg.
One bag SikaFloor Marine S-110 Powder is mixed with approx. 8.5-9.0 litres of cold, fresh water to produce an easy-flowing substance.Mix thoroughly the compound in an agitator mixer (with fixed vessel) or with a power blender (power drill with appropriate blender acces-sories).

Application:

Application is most easily performed with a Linotol trowel (steel board) or smooth spatula and does not distinguish itself from other similar marine flooring types.
After application of the SikaFloor Marine S-110 the compound must be protected against strong, direct heat and sunlight as well as draft.

Note: The product can not be used in an area with a gradient is more than 3%. Contact Sika Cufadan for further information.

Dehydration / curing:

At +20°C and 65% relative humidity the compound will cure after 6-8 hours. The dehydration
time is depending on the thickness of the applied layer, temperature, relative humidity and ventilation at the working area. The compound must be fully dry (the moisture has to be _<4% by weight) prior to the application of dense deck finish materials or waterproof coatings.

Cleaning (tools):

Use water for cleaning of tools (before the compound is cured).

Shelf-life:

The shelf-life is min. six (6) months.

Important:

SikaFloor Marine S-110 powder may not be exposed to moisture and freezing temperatures.
The applied SikaFloor Marine S-110 compound may not be exposed to freezing temperatures and direct heat or sunlight before being fully dry.
For additional technical information pleasecontact our technical department.